Do it yourself
| ||||
|
Toyota Prius - Rear light bulb
Toyota Prius (2004-2009 / MK 1)
Rear light bulb replacement The replacement of the rear light bulbs is extremely simple to carry out since it is not necessary to remove the light itself: therefore open the rear hood and …read all… Posted on 31 August 2023 by ScegliAuto
Toyota Prius (2009-2015 / Xw30, MK 2)
Rear light replacement instructions To be able to replace the rear light, it must be removed: then open the rear hood, remove the shelf and the floor covering in order to subsequently remove the …read all… Posted on 12 July 2023 by ScegliAuto
Toyota Prius (2004-2009 / MK 1)
Rear light bulb replacement To replace the lamp you only need a screwdriver and a ratchet wrench. To replace the bulb it is necessary to disassemble the entire lighting assembly. The …read all… Posted on 3 July 2023 by ScegliAuto Shock absorbers (1) Antenna (3) Air conditioning (1) Battery (21) Spark plugs (3) Key (25) Timing belt (1) V-belt (3) -board computer (6) Checks and maintenance (32) Brake discs (1) Rear bench seat (2) Side indicator light (1) Headlight (2) Tail light (2) Air filter (5) Cabin air filter (12) Petrol filter (2) Accessory Kit (3) Light bulb (2) Headlight bulb (6) Rear light bulb (3) Antifreeze liquid (1) License plate light (2) Handle (1) Gear oil (1) Brake oil (1) Engine oil (8) Front bumper (3) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Tires (8) Fuel pump (1) Window lift button (1) Instrument cluster (8) Fuse box (7) Seat (3) Windscreen wipers (3) Central tunnel (2) Windshield washer nozzle (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |