Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Toyota Prius

Model: Toyota Prius MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

See other generations:
Video tutorial

Today's procedure will show you how to remove and replace the rear light bulb on a Toyota Prius in simple steps. First, open the vehicle's bonnet and start by removing the side trim panel; then unscrew the screws of the rear light and disconnect the bulb connector to remove it, as shown in the video.

At this point, remove the stop bulb and replace it with a new one (with the same fitting); then refit the rear light onto the bodywork, applying the reverse procedure!


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the 2010 Toyota Prius
How to replace the rear headlight bulb of the 2010 Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) In the following guide dedicated to all of you who own a second-generation Toyota Prius (year 2010), we will explain the various steps you need to ta…
How to Replace the Number Plate Bulb on a Toyota Prius
How to Replace the Number Plate Bulb on a Toyota Prius
Toyota Prius (2004-2009 / MK 1) Remove the number plate light unit located in the rear bumper of the car using a plastic lever (transparent lens). Once the light unit is removed, ex…
How to Replace the Number Plate Bulb on a Toyota Prius
How to Replace the Number Plate Bulb on a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Here’s how to replace the number plate bulb on a Toyota Prius: Open the boot lid, and use a plastic lever to remove the plastic cover located in the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos