Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Courtesy Light in the Door on a Toyota Prius?

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Light bulb

See other generations:
Video tutorial

To replace the courtesy light in the door on a Toyota Prius, lever the lower part of the light fitting, located at the base of the door panel: this will allow you to remove the light fitting and disconnect the connector attached to it. Once the connector is disconnected, you can pull out the bulb inside and replace it with a new one: after the replacement, reconnect the light fitting to the corresponding connector.

At this point, insert it back into its housing, ensuring everything works.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light on a Toyota Prius
How to Replace the Third Brake Light on a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) In this video, learn how to change the third brake light on a Toyota Prius: slightly lift the rear hatch to bring the third brake light to eye level.…
How to Replace the Number Plate Bulb on a Toyota Prius
How to Replace the Number Plate Bulb on a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Here’s how to replace the number plate bulb on a Toyota Prius: Open the boot lid, and use a plastic lever to remove the plastic cover located in the …
How to Remove the Front Door Panel of the Toyota Prius
How to Remove the Front Door Panel of the Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Today we will go through the step-by-step instructions for removing the front door panel of the Toyota Prius. First, open the front door of the vehic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos