Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Door trim panel

Today we will see step-by-step instructions useful for disassembling the front door panel of the Toyota Prius. First, we open the front door of the car and start unscrewing the fixing screw found inside the handle; we do the same operation by removing the cover of the opening handle, as shown in the video. At this point, we pry on the sides of the panel to detach and remove it, disconnecting the electrical connector of the window switch panel and the handle cable; if necessary, we replace the door panel, reassembling everything!

Posted on 20 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the door panel of a Toyota Prius?
How to disassemble the door panel of a Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) To remove the door panel of a Toyota Prius, start by turning off the engine and making sure the windows are rolled up. Use a flathead screwdriver cov…
Where is the OBD port of the Toyota Prius located?
Where is the OBD port of the Toyota Prius located?
Toyota Prius (2009-2015 / Xw30, MK 2) Locating the OBD port inside your Toyota Prius is really very simple and you don't need to disassemble any component of the car. All you have to do i…
How to open the fuel door on the Toyota Prius?
How to open the fuel door on the Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) In this tutorial we can see how to open the fuel door in the Toyota Prius, an extremely simple operation that is not different from the typical proce…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos