Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Prius
    4. : Rear bumper

Toyota Prius - Rear bumper

Toyota Prius (2009-2015 / Xw30, MK 2)
How to replace the rear bumper on a Toyota Prius?
In this tutorial, we can see how to replace the rear bumper on a Toyota Prius, which is a very simple operation. To do this, we will need a 10mm socket wrench, …read all…
Posted on 23 April 2023 by ScegliAuto
Toyota Prius (2004-2009 / MK 1)
Rear bumper removal instructions
The disassembly of the rear bumper is quite simple to carry out and does not require the vehicle to be lifted on the bridge, much less the disassembly of any …read all…
Posted on 20 August 2023 by ScegliAuto
Shock absorbers (1) Antenna (3) Air conditioning (1) Battery (21) Spark plugs (3) Key (25) Timing belt (1) V-belt (3) -board computer (6) Checks and maintenance (32) Brake discs (1) Rear bench seat (2) Side indicator light (1) Headlight (2) Tail light (2) Air filter (5) Cabin air filter (12) Petrol filter (2) Accessory Kit (3) Light bulb (2) Headlight bulb (6) Rear light bulb (3) Antifreeze liquid (1) License plate light (2) Handle (1) Gear oil (1) Brake oil (1) Engine oil (8) Front bumper (3) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Tires (8) Fuel pump (1) Window lift button (1) Instrument cluster (8) Fuse box (7) Seat (3) Windscreen wipers (3) Central tunnel (2) Windshield washer nozzle (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos