Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Bumper

Model: Toyota Prius MK 1 - Years 2004-2009
Part: Rear bumper

Removing the rear bumper is quite simple and does not require lifting the vehicle on a ramp or removing any elements like the rear wheels or headlights; it mainly involves removing the pins and pressure clips (first extract the central pin and then the entire clip) located along the edges of the bumper, specifically along the wheel arch, along the lower edge, and inside the closure line of the bonnet. Once the pins, screws, and pressure clips are removed, you can pull the bumper away from its housing and complete the removal.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Toyota Prius?
How to remove the front bumper of the Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) The instructions below will guide you through the process of removing and replacing the front bumper of the Toyota Prius. First, open the bonnet of t…
How to Remove the Front Bumper of a Toyota Prius
How to Remove the Front Bumper of a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Learn how to remove the front bumper of a Toyota Prius. Lift the bonnet and secure it with the prop rod. Using a plastic (or metal) lever, remove the…
How to Replace the Rear Bumper on the Toyota Prius?
How to Replace the Rear Bumper on the Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) In this tutorial, see how to replace the rear bumper on the Toyota Prius, a very simple operation. To do this, you will need a 10mm socket, a plastic…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos