|
Do it yourself
| |||
| ||||
How to replace the headlights on the Toyota Prius MK2
Model: Toyota Prius
Xw30, MK 2
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
Let’s see how to replace the front headlights on the Toyota Prius MK2: it is an operation that requires removing the bumper. Remove the wheel cover, unlock the bumper by unscrewing the 10 mm screws underneath, at the sides, and in the grille; disconnect the fog light connectors and cable clips, then pull the bumper forward to detach it. Now remove the old headlight; unscrew the 3 screws that secure the headlight (on top and the side), then release the adjustment clip at the bottom with a screwdriver and pull the headlight towards you. Now disconnect the three electrical connectors. Transfer the bulbs to the new headlight, being careful not to touch the glass of the bulb, and reassemble them on the new headlight. Connect the connectors to the new headlight, insert the headlight into its housing, and screw in the three securing screws. Refit the bumper (in reverse order to disassembly); reconnect the fog lights and all clips. After this, it will be necessary to adjust the headlights by measuring the height of the centre of the projector from the ground. Mark the same height on a wall, then lower the reference point by 10 cm. Behind the headlight, there is the adjustment screw: horizontally it moves the beam left/right while vertically it raises and lowers it. The top edge of the light beam should align with the marked line on the wall.
Posted on 11 September 2026 by ScegliAuto
Related tutorials
Toyota Prius
(2009-2015 /
Xw30, MK 2)
In this tutorial, we will see how to replace the front headlights on the Toyota Prius, a very simple operation but requiring the removal of the bumpe…
Toyota Prius
(2004-2009 /
MK 1)
In this tutorial, see how to replace the headlights on a Toyota Prius, a very simple and quick operation. First, ensure that the key is not inserted …
Toyota Prius
(2009-2015 /
Xw30, MK 2)
In this tutorial, we can see how to install fog lights on the Toyota Prius, a very simple operation. First, we remove the lower left switch panel fro…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |