Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Rear Light

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light, you need to remove it: open the rear boot, remove the shelf and the floor covering to subsequently remove the side plastic cover corresponding to the light; also detach the seal and the internal boot threshold. Once the side plastic cover is removed, you need to remove the rear bumper by detaching it from the sides to then pull the light away from its housing after unscrewing the fixing bolts from the inside.

At this point, disconnect the power connector and proceed in reverse for the installation of the new light.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Rear Light Disassembly Instructions
Rear Light Disassembly Instructions
Toyota Prius (2004-2009 / MK 1) To disassemble the rear light, you need to remove a significant portion of the internal trim of the boot on the side of the light to be removed. Star…
Rear Headlamp Bulb Replacement
Rear Headlamp Bulb Replacement
Toyota Prius (2004-2009 / MK 1) Replacing the bulbs in the rear headlamp is extremely simple as it is not necessary to remove the headlamp itself: open the rear boot and locate the …
Dismantling and Replacing the Rear Light
Dismantling and Replacing the Rear Light
Toyota Prius (2009-2015 / Xw30, MK 2) Open the rear bonnet and remove the trim panel of the boot floor. Then, remove the side trim panels inside the bonnet (it is necessary to also remove…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos