Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Prius
    4. : Tail light

Toyota Prius - Tail light

Toyota Prius (2004-2009 / MK 1)
Rear light disassembly instructions
In order to remove the rear light it is necessary to remove a good portion of the inner lining of the luggage rack, on the side of the light that must be …read all…
Posted on 28 August 2023 by ScegliAuto
Toyota Prius (2009-2015 / Xw30, MK 2)
Removal and replacement of the rear light
Open the rear lid and remove the luggage compartment tray trim panel. Then remove the side trim panels inside the bonnet (it is also necessary to remove the …read all…
Posted on 1 July 2023 by ScegliAuto
Shock absorbers (1) Antenna (3) Air conditioning (1) Battery (21) Spark plugs (3) Key (25) Timing belt (1) V-belt (3) -board computer (6) Checks and maintenance (32) Brake discs (1) Rear bench seat (2) Side indicator light (1) Headlight (2) Tail light (2) Air filter (5) Cabin air filter (12) Petrol filter (2) Accessory Kit (3) Light bulb (2) Headlight bulb (6) Rear light bulb (3) Antifreeze liquid (1) License plate light (2) Handle (1) Gear oil (1) Brake oil (1) Engine oil (8) Front bumper (3) Rear bumper (2) Brake pads (4) Hydraulic pistons (1) Tires (8) Fuel pump (1) Window lift button (1) Instrument cluster (8) Fuse box (7) Seat (3) Windscreen wipers (3) Central tunnel (2) Windshield washer nozzle (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos