Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan on Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Blower motor

See other generations:
Video tutorial

Need to remove the cabin fan? Here’s how to do it from inside the glove compartment. Open the glove compartment door, use a lever to remove the plastic of the container.

After removing the glove compartment, remove the cover plastics of the cabin filter and the plastics under the glove compartment. Unscrew the securing screws of the air fan, disconnect the power connector, then pull it out from the cabin.

Insert a new fan (connect the power connector). Finally, refit the cover trim and tighten the screws.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan in a Toyota Yaris?
How to Replace the Cabin Fan in a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will see how to replace the cabin fan in a Toyota Yaris, a very simple and quick operation. First, ensure that the key is not i…
Where to Find the Fuse Box on the Toyota Yaris
Where to Find the Fuse Box on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) If you own a third-generation Toyota Yaris and want to find the vehicle's fuse box, carefully read the following guide and follow the steps described…
Removing the Cabin Heater Radiator on the Toyota Yaris 1
Removing the Cabin Heater Radiator on the Toyota Yaris 1
Toyota Yaris (1999-2005 / Xp10) In this video tutorial, we will go through the main steps to remove the cabin heater radiator on the Toyota Yaris first series. First, get inside the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos