Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Warning Light on the Toyota C-HR

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Warning light – error code

Turn off the tyre warning light if it appears on the info display. Start the car's ignition, use the buttons on the right side of the steering wheel, then, once in the settings menu, scroll using the navigation buttons until you find "Reset Tyres". Select it using the OK button to turn off the tyre pressure warning light and exit the settings menu. Check the instrument cluster by turning it off and on again with the ignition key. Check the tyre pressures using an air compressor.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Toyota C-HR?
How to reset the Service light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) You can completely clear the Service light from the instrument panel of the Toyota C-HR by turning on the ignition and pressing the TRIP button locat…
How to Reset the Service Light on a Toyota C-HR?
How to Reset the Service Light on a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) From the dashboard of the Toyota C-HR, you can completely turn off the service light by turning on the dashboard and pressing the TRIP button located…
How to Reset the Service Light on the Toyota C-HR?
How to Reset the Service Light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To reset the Service light on the Toyota C-HR, turn on the ignition and press the TRIP button located on the right spoke of the steering wheel. This …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos