Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Toyota C-HR?

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part:

In this tutorial, you will learn how to reset the tyre warning light on a Toyota C-HR, a very simple and quick operation. Before proceeding, ensure that you have restored the correct pressure in each tyre according to the instructions in the manual. Start by entering the cabin and turning on the instrument panel, then scroll through the various screens to the right until you reach the settings screen. Next, enter "Vehicle Settings", then "Setup", and perform the reset by selecting "SET". To complete the operation, simply restart the vehicle.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn Off the Warning Light on the Toyota C-HR
How to Turn Off the Warning Light on the Toyota C-HR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Turn off the tyre warning light if it appears on the info display. Start the car's ignition, use the buttons on the right side of the steering wheel,…
How do you reset the tire pressure warning light on the Toyota C-HR?
How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) It will be possible to completely turn off the tire pressure warning light that appears on the instrument panel of the Toyota C-HR by first inflating…
How to reset the tyre warning light on the 2020 Toyota C-HR?
How to reset the tyre warning light on the 2020 Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Follow the instructions in the video to reset the tyre pressure warning light on the 2020 Toyota C-HR. Before starting, ensure that the tyres are at …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos