Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Spark Plugs on Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Spark plugs

See other generations:
Video tutorial

How do you remove the spark plugs from a Toyota Yaris? Let’s see how to remove the spark plugs from the Toyota Yaris. Lift the front bonnet and secure it. Remove the soundproofing panel above the engine, undo the securing pins that hold the leads with a socket.

Use a socket to undo the damaged spark plugs from inside the engine (extract them from the cylinder head). Take the new spark plug and insert it into the cylinder head and screw it in with the socket.

Refit the engine cover panel, then start the engine for a functionality test.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Replacing Spark Plugs on Toyota Yaris
Replacing Spark Plugs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Want to remove the spark plugs from a Yaris? Let's see how to do it. Lift the front bonnet of the car, and start by removing the air filter housing: …
Replacing the Spark Plugs on the Toyota Yaris
Replacing the Spark Plugs on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will learn how to remove and replace the engine spark plugs on the Toyota Yaris by following these simple and quick steps. Firs…
How to Replace the Spark Plugs in the Toyota Yaris
How to Replace the Spark Plugs in the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's video, learn how to replace the spark plugs in the petrol Toyota Yaris. It is advisable to work with a cold engine to avoid any unpleasant…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos