Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs in a Toyota Yaris 3

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Spark plugs

See other generations:
Video tutorial

In this tutorial, see how to replace the spark plugs in a Toyota Yaris 3 by following these simple steps: get in the vehicle, switch off the engine, and pull the handbrake. Lift the bonnet and secure it with the prop rod. Remove the engine cover to access the spark plugs.

Disconnect the coil power supply; use a screwdriver to lift the support tab of the connector, then pull up the terminal. Use a 10 mm socket to loosen the coil retaining nut; now you can remove the coil by making small rocking movements.

Use a 16 mm socket with an extension to loosen the spark plugs. Once all the spark plugs are removed, install the new ones (start by hand, then finish with the socket); tighten with a torque wrench according to the manufacturer's specifications, then reassemble all parts in reverse order.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plugs on the Toyota Yaris
Replacing the Spark Plugs on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will learn how to remove and replace the engine spark plugs on the Toyota Yaris by following these simple and quick steps. Firs…
Replacing Spark Plugs on Toyota Yaris
Replacing Spark Plugs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Want to remove the spark plugs from a Yaris? Let's see how to do it. Lift the front bonnet of the car, and start by removing the air filter housing: …
Removing Spark Plugs on Toyota Yaris
Removing Spark Plugs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) How do you remove the spark plugs from a Toyota Yaris? Let’s see how to remove the spark plugs from the Toyota Yaris. Lift the front bonnet and secur…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos