Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cylinder Head Cover on a Toyota Probox

Model: Toyota Probox Xp50 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cylinder head

See other generations:
Video tutorial

This guide provides instructions on how to remove and replace the cylinder head cover on a Toyota Probox in simple and quick steps. First, open the hood of your car and begin disconnecting the various wiring harnesses located on the top of the cylinder head; then disconnect the spark plug boots using a socket wrench with an extension to unscrew and remove them, as shown in the video.

At this point, unscrew the additional screws on the sides of the cylinder head cover to remove it, applying the reverse procedure for reassembly!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of the Toyota Probox VVT-I
How to Replace the Spark Plugs of the Toyota Probox VVT-I
Toyota Probox (2002-2014 / Xp50) This guide explains how to remove and replace the spark plugs of the Toyota Probox by following these simple and quick steps. First, open the hood an…
How to Replace the Valve Cover Gasket on the Toyota Probox
How to Replace the Valve Cover Gasket on the Toyota Probox
Toyota Probox (2014-2024 / Xp160) To replace the valve cover gasket, open the hood to access the components inside the engine compartment. You will need to loosen the screws securing …
How to Reset the Engine Light and Errors in the Toyota Probox
How to Reset the Engine Light and Errors in the Toyota Probox
Toyota Probox (2014-2024 / Xp160) In this guide, you will learn how to reset the engine light and all errors from the ECU in the Toyota Probox. First, get inside the vehicle and turn …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos