Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Valve Cover Gasket on the Toyota Probox

Model: Toyota Probox Xp160 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the valve cover gasket, open the hood to access the components inside the engine compartment. You will need to loosen the screws securing the engine head after removing the injectors and coils.

This will allow you to open the valve cover and completely remove the gasket inside. After the old gasket is removed, insert the new one and reposition the valve cover, securing it with the appropriate screws.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of the Toyota Probox VVT-I
How to Replace the Spark Plugs of the Toyota Probox VVT-I
Toyota Probox (2002-2014 / Xp50) This guide explains how to remove and replace the spark plugs of the Toyota Probox by following these simple and quick steps. First, open the hood an…
How to remove the radio and air conditioning console on the Toyota Probox
How to remove the radio and air conditioning console on the Toyota Probox
Toyota Probox (2002-2014 / Xp50) In this video we can see how to remove the car radio from the Toyota Probox, by removing the air conditioning console. The Toyota Probox is a light c…
Where to Find the Fuse Box of the Toyota Probox
Where to Find the Fuse Box of the Toyota Probox
Toyota Probox (2002-2014 / Xp50) If you are looking for the fuse box of your 2006 Toyota Probox but have not found it yet, do not worry because below you will find all the necessary …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos