Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio and air conditioning console on the Toyota Probox

Model: Toyota Probox Xp50 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

In this video we can see how to remove the car radio from the Toyota Probox, by removing the air conditioning console. The Toyota Probox is a light commercial vehicle, very popular in Asia, with square lines and a Spartan interior, as we can also see from the technique used to remove the console from its housing; just lever up and down and pull the mask towards us. At this point it will be enough to remove the electrical connectors, which connect the air conditioning mask to the vehicle, and we can unscrew the four screws that connect the radio to the dashboard.


Posted on 20 January 2025 by ScegliAuto


Related tutorials

How to Replace the Air Conditioning Condenser on the Toyota Probox?
How to Replace the Air Conditioning Condenser on the Toyota Probox?
Toyota Probox (2002-2014 / Xp50) To replace the air conditioning condenser on the Toyota Probox, open the hood to access the part located inside the engine compartment. It will be po…
Where to Find the Fuse Box of the Toyota Probox
Where to Find the Fuse Box of the Toyota Probox
Toyota Probox (2002-2014 / Xp50) If you are looking for the fuse box of your 2006 Toyota Probox but have not found it yet, do not worry because below you will find all the necessary …
How to Replace the Brake Shoes on a Toyota Probox
How to Replace the Brake Shoes on a Toyota Probox
Toyota Probox (2002-2014 / Xp50) To replace the brake shoes on a Toyota Probox, lift the vehicle with a jack or lift so that the wheel corresponding to the shoes being replaced is no…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos