Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box of the Toyota Probox

Model: Toyota Probox Xp50 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

If you are looking for the fuse box of your 2006 Toyota Probox but have not found it yet, do not worry because below you will find all the necessary information. Remember that any maintenance on the fuses must be done with the battery disconnected (it is also recommended to wear a pair of rubber gloves).

Once you have taken these simple precautions, go inside the vehicle (driver's side) and locate the compartment to the left of the steering wheel. Remove the cover, and right behind it, you will finally have access to all the various fuses in the car.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to remove the radio and air conditioning console on the Toyota Probox
How to remove the radio and air conditioning console on the Toyota Probox
Toyota Probox (2002-2014 / Xp50) In this video we can see how to remove the car radio from the Toyota Probox, by removing the air conditioning console. The Toyota Probox is a light c…
How to Check the Engine Oil Level of the Toyota Probox
How to Check the Engine Oil Level of the Toyota Probox
Toyota Probox (2002-2014 / Xp50) This guide provides the main instructions to check the engine oil level of the Toyota Probox by following these simple steps. First, open the hood of…
How to Change the Engine Oil in the Toyota Probox
How to Change the Engine Oil in the Toyota Probox
Toyota Probox (2002-2014 / Xp50) Today, in this video tutorial, learn how to change the engine oil in the Toyota Probox as part of regular maintenance. First, lift the vehicle and st…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos