Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level of the Toyota Probox

Model: Toyota Probox Xp50 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

This guide provides the main instructions to check the engine oil level of the Toyota Probox by following these simple steps. First, open the hood of your car and remove the engine oil dipstick; use a clean cloth to wipe off all the oil from the stick.

At this point, reinsert the dipstick and wait a couple of seconds; remove the stick and check the oil level, indicated on the lower part of the stick. If the level is at the minimum mark, you will need to add oil to bring it up to the maximum mark!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Toyota Probox
How to Change the Engine Oil in the Toyota Probox
Toyota Probox (2002-2014 / Xp50) Today, in this video tutorial, learn how to change the engine oil in the Toyota Probox as part of regular maintenance. First, lift the vehicle and st…
How to remove the radio and air conditioning console on the Toyota Probox
How to remove the radio and air conditioning console on the Toyota Probox
Toyota Probox (2002-2014 / Xp50) In this video we can see how to remove the car radio from the Toyota Probox, by removing the air conditioning console. The Toyota Probox is a light c…
Guide to Removing the Cylinder Head Cover on a Toyota Probox
Guide to Removing the Cylinder Head Cover on a Toyota Probox
Toyota Probox (2002-2014 / Xp50) This guide provides instructions on how to remove and replace the cylinder head cover on a Toyota Probox in simple and quick steps. First, open the h…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos