Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs of the Toyota Probox VVT-I

Model: Toyota Probox Xp50 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Spark plugs

See other generations:
Video tutorial

This guide explains how to remove and replace the spark plugs of the Toyota Probox by following these simple and quick steps. First, open the hood and start unscrewing the screws of the upper valve cover.

Once removed, disconnect the spark plug boots or connectors using a socket wrench with an extension to unscrew and remove them, as shown in the video. Next, replace the spark plugs with new ones of the same thread pitch; then hand-tighten them before securing with a wrench, following the video tutorial until the end for reassembly!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to remove the radio and air conditioning console on the Toyota Probox
How to remove the radio and air conditioning console on the Toyota Probox
Toyota Probox (2002-2014 / Xp50) In this video we can see how to remove the car radio from the Toyota Probox, by removing the air conditioning console. The Toyota Probox is a light c…
Replacing the Front Brake Pads on the Toyota Probox
Replacing the Front Brake Pads on the Toyota Probox
Toyota Probox (2002-2014 / Xp50) In today's tutorial video, you will learn how to remove and replace the front brake pads on the Toyota Probox by following these simple steps. First,…
How to Check the Engine Oil Level of the Toyota Probox
How to Check the Engine Oil Level of the Toyota Probox
Toyota Probox (2002-2014 / Xp50) This guide provides the main instructions to check the engine oil level of the Toyota Probox by following these simple steps. First, open the hood of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos