Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Toyota Probox

Model: Toyota Probox Xp50 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the front brake pads on the Toyota Probox by following these simple steps. First, lift the vehicle and start by removing the wheel; then, unscrew the bolts securing the brake caliper, which are located at the back, to remove it and access the pads, as shown in the video.

At this point, replace the brake pads with new ones of the correct type and high quality; clean the caliper of dirt and install the new pads, applying the reverse procedure!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Conditioning Condenser on the Toyota Probox?
How to Replace the Air Conditioning Condenser on the Toyota Probox?
Toyota Probox (2002-2014 / Xp50) To replace the air conditioning condenser on the Toyota Probox, open the hood to access the part located inside the engine compartment. It will be po…
How to Replace the Brake Shoes on a Toyota Probox
How to Replace the Brake Shoes on a Toyota Probox
Toyota Probox (2002-2014 / Xp50) To replace the brake shoes on a Toyota Probox, lift the vehicle with a jack or lift so that the wheel corresponding to the shoes being replaced is no…
How to remove the radio and air conditioning console on the Toyota Probox
How to remove the radio and air conditioning console on the Toyota Probox
Toyota Probox (2002-2014 / Xp50) In this video we can see how to remove the car radio from the Toyota Probox, by removing the air conditioning console. The Toyota Probox is a light c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos