Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Opening the Bonnet of a Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

See other generations:
Video tutorial

How to open the bonnet of the Yaris? Here’s how to open the front bonnet of the Toyota for maintenance. Pull the lever located at the bottom left of the dashboard, then lift the bonnet slightly and pull the release lever to the left.

Once the engine bonnet is unlocked, lift it up and secure it with the prop rod. With the engine bonnet raised, you can carry out maintenance. After finishing the car maintenance, simply close the front bonnet: do not let it drop from too great a height to avoid damage.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) If you need to carry out maintenance on your Toyota Yaris, you must open the front bonnet where the engine and reservoirs are located. Here’s how to …
How to Open the Bonnet of the Toyota Yaris
How to Open the Bonnet of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) The following steps will show you how to open the bonnet of the Toyota Yaris in a few simple moves. First, open the driver's side front door and pull…
How to Open the Boot of a Toyota Yaris?
How to Open the Boot of a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Opening the rear hatch or boot of a Toyota Yaris is a very simple operation. To open the boot from inside the vehicle, lift the lever with the boot s…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos