Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Spark Plugs

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Spark plugs

See other generations:
Video tutorial

Remove the engine cover. To avoid mixing up the cables, disconnect one spark plug at a time.

Before disassembly, thoroughly clean the wells with compressed air to eliminate any dirt that could fall into the combustion chamber. Using a 10mm socket, unscrew the sealing nut of the first spark plug and pull the connector upwards.

Using the special spark plug tool, which has a rubber gripping device, gently insert it onto the spark plug head and unscrew it. Be careful not to drop foreign objects into the well. Replace the spark plug with one of the same model, carefully inserting it into the well, always using the special tool and turning it gently to ensure it screws in correctly.

If you encounter resistance, remove it and retry. The spark plugs should be tightened with a torque wrench; if you do not have one, tighten without overdoing it. Repeat the same operation with the other spark plugs.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plugs on the Toyota Yaris
Replacing the Spark Plugs on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will learn how to remove and replace the engine spark plugs on the Toyota Yaris by following these simple and quick steps. Firs…
How to Replace the Spark Plugs in the Toyota Yaris
How to Replace the Spark Plugs in the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's video, learn how to replace the spark plugs in the petrol Toyota Yaris. It is advisable to work with a cold engine to avoid any unpleasant…
Removing Spark Plugs on Toyota Yaris
Removing Spark Plugs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) How do you remove the spark plugs from a Toyota Yaris? Let’s see how to remove the spark plugs from the Toyota Yaris. Lift the front bonnet and secur…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos