Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Vibration Noise in the Door

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

The first operation is to remove the door panel: unscrew the panel fixing screws (one inside the handle, one inside the opening lever housing, and two at the front of the panel: these last ones are actually pressure clips, so the screw loosens slightly and then the pin is extracted).

Next, disconnect the control switch for the electric window lifters, the internal cover of the rear-view mirror, and lever along the edges of the panel to remove it. Peel off the plastic covering and proceed to remove the lock to extract it along with the metal plate that has detached and is causing the noise: then secure the metal plate to the lock with screws and proceed to reassemble in reverse order.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

What to Do If the Third Brake Light Makes Noise on Your Toyota Yaris
What to Do If the Third Brake Light Makes Noise on Your Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Let’s see how to remedy a problem affecting some models of the Toyota Yaris. In fact, there are some models where - perhaps due to a defect in the as…
How to Remove the Lock from a Toyota Yaris Door
How to Remove the Lock from a Toyota Yaris Door
Toyota Yaris (1999-2005 / Xp10) Do you want to remove the lock from inside the door of your Toyota Yaris? Here's how to disassemble the parts. Unscrew the securing screws above the …
How to Remove the Inner Door Panel on a Yaris
How to Remove the Inner Door Panel on a Yaris
Toyota Yaris (2005-2011 / Xp90) How do you remove the cover panel of the Yaris? Let's see how to take off the panel from above the door. Remove the plastic covering inside the door …

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos