Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the External Rear View Mirror on a Toyota Yaris MK3

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

In this guide, discover the instructions to remove and replace the external rear view mirror on a Toyota Yaris third series. First, get inside the vehicle and start by removing the door panel; unscrew all the fastening screws and lever it off from the sides, disconnecting the electrical connector and the handle cable found at the back.

At this point, disconnect the electrical connector for the mirror adjustment and unscrew the fastening screws to extract the mirror from the outside; finally, reassemble everything!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Replacement of the external rearview mirror of the Toyota Yaris
Replacement of the external rearview mirror of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This brief guide will show us how to disassemble and replace the external rearview mirror of the Toyota Yaris. First, we open the front door of the c…
How to replace the external rearview mirror of the Toyota Yaris
How to replace the external rearview mirror of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's steps will allow us to disassemble and replace the external rearview mirror of the Toyota Yaris. First, we open the front door of the car and…
How to Remove the Wing Mirror on a Toyota Yaris
How to Remove the Wing Mirror on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Is the external mirror of your Toyota Yaris damaged? Do you want to replace it? Let's see how to proceed. Detach the mirror adjustment lever, then un…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos