Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Clock on Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Clock

Insert and turn the ignition key in the appropriate slot to power up the dashboard (there's no need to start the engine). At this point, you will see the time and external temperature: press the button next to these values and hold it for 7 seconds. This will cause the hour value to start flashing, and each time you press the button, the value will advance by one digit. Once you reach the desired number, release the button for several seconds until the minute value starts flashing: perform the same procedure and you're done. Clock set!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on the Toyota Yaris Instrument Cluster
How to Change the Time on the Toyota Yaris Instrument Cluster
Toyota Yaris (2005-2011 / Xp90) Today's guide will show you the steps to adjust the time on the instrument cluster of the Toyota Yaris. First, get in the car and turn on the instrum…
How to Set the Time on a Toyota Yaris?
How to Set the Time on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) Below are the main instructions to change the time on the display of the instrument cluster in a Toyota Yaris. First, get in the vehicle and turn on …
How to set the time on the display of the Toyota Yaris instrument panel
How to set the time on the display of the Toyota Yaris instrument panel
Toyota Yaris (2005-2011 / Xp90) Today's information will allow us to reset the service light for the regular maintenance of the engine oil change in the Toyota Yaris. First, we get …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos