Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of the Toyota Tacoma

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Seat

See other generations:
Video tutorial

In this short and simple guide, discover the steps to remove the front seat of the Toyota Tacoma. First, open the front door and start by unscrewing all the screws found on the front seat tracks; to do this, first remove the plastic covers and use a socket wrench to unscrew the screws, moving the seats back and forth as shown in the video.

At this point, disconnect the electrical connector located under the seat to remove it; repeat the same procedure for removing the other front seat!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

Removing the Front Seat of the Toyota Tacoma MK3
Removing the Front Seat of the Toyota Tacoma MK3
Toyota Tacoma (2016-2026 / N300) In this video, learn how to remove the front seat from the third generation Toyota Tacoma in simple and quick steps. First, open the front and rear d…
Remove the Front Bumper of the Toyota Tacoma 2
Remove the Front Bumper of the Toyota Tacoma 2
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In this short and simple video, you will see how to remove the front bumper of the second generation Toyota Tacoma by following the instructions belo…
Guide to Removing the Front Door Panel of the Toyota Tacoma
Guide to Removing the Front Door Panel of the Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this short guide, you will learn the procedure to remove the front door panel of the Toyota Tacoma in simple steps. First, open the front door and…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos