Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Removing the Front Door Panel of the Toyota Tacoma

Model: Toyota Tacoma N150, N190, N140, N160, N170 - Years 1995-2004
Part: Door trim panel

In this short guide, you will learn the procedure to remove the front door panel of the Toyota Tacoma in simple steps. First, open the front door and start by removing the door handle; to do this, unscrew the screws located inside the holes. Next, unscrew the screw found on the opening handle; then, remove the window crank and pry on the sides of the panel to finally detach it from the rear clips. For reassembly, simply apply the reverse procedure!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) In this guide, you will find instructions to remove the front door panel of the Toyota Tacoma. First, open the front door and start by unscrewing all…
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) In today's video, you will see the procedure necessary to remove the front door panel of the Toyota Tacoma. First, open the front door and start by r…
Toyota Tacoma (2016-2026 / N300) In this video, learn how to remove the front seat from the third generation Toyota Tacoma in simple and quick steps. First, open the front and rear d…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos