Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Toyota Tacoma

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Door trim panel

See other generations:
Video tutorial

In this guide, you will find instructions to remove the front door panel of the Toyota Tacoma. First, open the front door and start by unscrewing all the mounting screws located on the panel, which you will find inside the holes.

Then, release the small metal clip or fastener of the window handle, and pry it off as shown in the video. At this point, unclip the door panel from the sides until you completely remove it. To reinstall the panel, simply follow the reverse procedure!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Toyota Tacoma
Removing the Front Door Panel of the Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) In today's video, you will see the procedure necessary to remove the front door panel of the Toyota Tacoma. First, open the front door and start by r…
Guide to Removing the Front Door Panel of the Toyota Tacoma
Guide to Removing the Front Door Panel of the Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this short guide, you will learn the procedure to remove the front door panel of the Toyota Tacoma in simple steps. First, open the front door and…
How to Replace the Exterior Door Handle on a Toyota Tacoma
How to Replace the Exterior Door Handle on a Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this short and simple video, see how to remove and replace the exterior door handle on a Toyota Tacoma by following the instructions below. First,…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos