Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Door Handle on a Toyota Tacoma

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Handle

See other generations:
Video tutorial

In this short and simple video, see how to remove and replace the exterior door handle on a Toyota Tacoma by following the instructions below. First, open the front door and start by removing the door panel, unscrewing all the screws you find on it; remove the interior handle and disconnect the opening handle cable, as shown in the video.

At this point, detach the mechanism and unscrew the lock screws, disconnecting the metal cable; remove the handle from the outside and replace it with the new one, reassembling everything!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Remove the Outer Handle of the Toyota Tacoma?
How to Remove the Outer Handle of the Toyota Tacoma?
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) To remove the outer handle of the door on the Toyota Tacoma, loosen the screws that secure the door panel: these are located under the armrest, benea…
How to Replace the Outer Door Lock on a Toyota Tacoma Mk1
How to Replace the Outer Door Lock on a Toyota Tacoma Mk1
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) This guide shows how to replace the outer door handle on a Toyota Tacoma Mk1. From inside the door, remove the two screw covers located under the arm…
How to Remove the Exterior Rearview Mirror of the Toyota Tacoma
How to Remove the Exterior Rearview Mirror of the Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) Today, we will see in this video tutorial how to remove and replace the exterior rearview mirror of the Toyota Tacoma in simple and quick steps. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos