Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Handle of the Toyota Tacoma?

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Handle

See other generations:
Video tutorial

To remove the outer handle of the door on the Toyota Tacoma, loosen the screws that secure the door panel: these are located under the armrest, beneath the window switch, and in the area of the inner handle. Once all screws are loosened, you can detach the panel and access the screws that hold the outer handle from the inside.

By unscrewing these screws, you can completely remove the handle, allowing you to install the new replacement part. After installation, reattach all removed components.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exterior Door Handle on a Toyota Tacoma
How to Replace the Exterior Door Handle on a Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this short and simple video, see how to remove and replace the exterior door handle on a Toyota Tacoma by following the instructions below. First,…
How to Replace the Outer Door Lock on a Toyota Tacoma Mk1
How to Replace the Outer Door Lock on a Toyota Tacoma Mk1
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) This guide shows how to replace the outer door handle on a Toyota Tacoma Mk1. From inside the door, remove the two screw covers located under the arm…
How to Wrap Your Toyota Tacoma?
How to Wrap Your Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) In this video, you can see how the authors completely transformed the exterior appearance of the Toyota Tacoma using the wrapping technique. This can…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos