|
Do it yourself
| |||
| ||||
How to Replace the Outer Door Lock on a Toyota Tacoma Mk1
Model: Toyota Tacoma
N150, N190, N140, N160, N170
- Years 1995-2004
This guide shows how to replace the outer door handle on a Toyota Tacoma Mk1. From inside the door, remove the two screw covers located under the armrest and unscrew the two Phillips screws; unscrew the Phillips screw located in the inner handle area and disconnect the lock cable. Lift the front of the power window switch and disconnect its wires. Remove the trim in the corner of the mirror. Using a plastic trim tool, lift the edges of the door panel to detach it. At this point, you can remove the plastic to access the outer handle. Disconnect the two clips, one pink and one white. With a 10 mm socket, remove the bolts on the lock. Pull out the handle and replace it; during this step, move the lock cylinder to the new part. Reassemble everything and check the proper operation of the lock.
Updated on 17 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Tacoma
(1995-2004 /
N150, N190, N140, N160, N170)
In this short and simple video, see how to remove and replace the exterior door handle on a Toyota Tacoma by following the instructions below. First,…
Toyota Tacoma
(1995-2004 /
N150, N190, N140, N160, N170)
To remove the outer handle of the door on the Toyota Tacoma, loosen the screws that secure the door panel: these are located under the armrest, benea…
Toyota Tacoma
(2016-2026 /
N300)
Today, we will see in this video tutorial how to remove and replace the exterior rearview mirror of the Toyota Tacoma in simple and quick steps. Firs…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.317
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |