Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the power window switch panel of the Toyota Prius?

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Power window switch

In order to replace the power window switch panel of the Toyota Prius, you need to pry it off with an object so that you can remove the trim surrounding the panel. Once the trim is removed, you can disconnect the panel underneath by unplugging the corresponding connector. After the old panel is removed, you can connect the new panel so that it fits into its housing; after installation, you can reattach the trim and make sure everything is functioning properly.

Posted on 7 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Window Switch Panel of a Toyota Prius
How to Dismantle the Window Switch Panel of a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) How to dismantle the window switch panel located in the door panel of a Toyota Prius? Let's see how to proceed: remove the plastic (located in the sp…
How to Replace the Battery of the Toyota Prius
How to Replace the Battery of the Toyota Prius
Toyota Prius (2004-2009 / MK 1) Replacing the battery of the Toyota Prius? Remove the battery if it is faulty and non-rechargeable. Open the rear hatch of the car and lift the cover…
How to Replace the Rear Washer Jet on a Toyota Prius
How to Replace the Rear Washer Jet on a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) To replace the rear washer jet on a Toyota Prius, lift the tailgate of the boot and remove the plastic cover from the upper inner part of the tailgat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos