Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the License Plate Bulb on a Toyota Tacoma

Model: Toyota Tacoma N300 - Years 2016-2026
Part: License plate light

To replace the license plate light bulb on a Toyota Tacoma, access the underside of the rear bumper to disconnect the connector attached to the bulb. Once the connector is disconnected, remove the old bulb from the connector and attach a new one. Insert the new bulb into its housing and repeat the process on the other side. Finally, check that the license plate is illuminated correctly and is sufficiently visible.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Tacoma (2016-2026 / N300) To replace the third brake light bulb on the Toyota Tacoma, you need to detach the headliner at the rear of the vehicle, also removing the clip locat…
Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight, where the connector for the bulb to be replaced…
Toyota Tacoma (2016-2026 / N300) These short and simple instructions will show us how to disassemble and replace the reverse light bulb of the Toyota Tacoma. First, let's move to the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos