Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Toyota Tacoma?

Model: Toyota Tacoma N150, N190, N140, N160, N170 - Years 1995-2004
Part: Light bulb

To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight, where the connector for the bulb to be replaced is located. Once the connector is disconnected, grasp the bulb and pull it out from its housing inside the headlight. After the old bulb is removed, connect the new one to the connector and insert it into its housing. After installation, verify that the device is functioning.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Toyota Tacoma
How to Replace the Headlight Bulb on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) Today, you will learn the steps to remove and replace the headlight bulb on a Toyota Tacoma. First, open the hood and start by removing the plastic c…
How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight that needs the bulb replacement. Here, detach th…
Replacement of the front headlight bulb of the Toyota Tacoma.
Replacement of the front headlight bulb of the Toyota Tacoma.
Toyota Tacoma (2016-2026 / N300) Let's see the necessary instructions on how to disassemble and replace the headlight bulb of the Toyota Tacoma. First, let's open the vehicle's hood …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos