Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Toyota Tacoma.

Model: Toyota Tacoma N300 - Years 2016-2026
Part: Headlight bulb

Let's see the necessary instructions on how to disassemble and replace the headlight bulb of the Toyota Tacoma. First, let's open the vehicle's hood and start by removing the plastic cover of the bulbs; then, disconnect the connector by removing the bulb holder with the bulb, as shown in the video. The video also demonstrates the replacement of the turn signal bulb, replacing the faulty bulbs with new ones (having the same fitting); let's check their operation and replace the other lights in the headlight assembly in the same way!

Posted on 12 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a Toyota Tacoma
Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) In this video, you can learn about the fuse diagram of a Toyota Tacoma automobile. The first fuse box can be found in the engine compartment and cont…
How to replace the front windshield wipers of the Toyota Tacoma
How to replace the front windshield wipers of the Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) Today we will see the instructions that will allow us to disassemble and replace the front windshield wipers of the Toyota Tacoma. First of all, let'…
How to Reset the Tire Pressure Light on a Toyota Tacoma?
How to Reset the Tire Pressure Light on a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To reset the tire pressure light on your Toyota Tacoma, first inflate the tires to the correct pressure: this value is listed on the sticker affixed …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos