Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Toyota Tacoma.

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

Let's discover the steps that will allow us to remove and replace the headlight bulb of the Toyota Tacoma. First, let's open the vehicle's hood and start by removing the rubber protective cap of the bulbs; then, disconnect the electrical connector of the low beam and high beam by releasing the metal clip to remove it, as shown in the video.

At this point, let's install the new low beam bulb, of the correct type (in this case, with an H4 socket); let's check its operation and finally secure the bulb protection!


Posted on 25 November 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight, where the connector for the bulb to be replaced…
How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight that needs the bulb replacement. Here, detach th…
How to Replace the Headlight Bulb on a Toyota Tacoma
How to Replace the Headlight Bulb on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) Today, you will learn the steps to remove and replace the headlight bulb on a Toyota Tacoma. First, open the hood and start by removing the plastic c…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos