Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Toyota Tacoma?

Model: Toyota Tacoma N270, N260, N250, N240, N220, MK 2 - Years 2005-2015
Part: Light bulb

To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight that needs the bulb replacement. Here, detach the circular plastic cover to disconnect the connector attached to the bulb. The bulb can now be pulled out of its housing and replaced with a new part. The new bulb should then be connected to the connector and inserted back into the headlight; after the replacement, close the back of the headlight with its cover.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Toyota Tacoma
How to Replace the Headlight Bulb on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) Today, you will learn the steps to remove and replace the headlight bulb on a Toyota Tacoma. First, open the hood and start by removing the plastic c…
How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight, where the connector for the bulb to be replaced…
How to Replace the Headlight Bulb on a Toyota Tacoma
How to Replace the Headlight Bulb on a Toyota Tacoma
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) To replace the headlight bulb on a Toyota Tacoma, open the hood to access the circular cover on the inside of the corresponding headlight. Once the c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos