Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Light bulb

Toyota Tacoma - Light bulb

Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the Toyota Tacoma headlight bulb
Before discovering how to easily and safely replace the Toyota Tacoma headlight bulb, we advise you to take all necessary precautions so as to improve the …read all…
Posted on 11 August 2022 by ScegliAuto
Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
How to replace the Toyota Tacoma headlight bulb?
The replacement of the Toyota Tacoma headlight bulb is carried out by opening the hood and accessing the rear part of the headlight, where the connector …read all…
Posted on 3 July 2022 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the Toyota Tacoma headlight bulb?
In order to replace the Toyota Tacoma headlight bulb, you need to open the hood and access the rear part of the headlight that needs to be replaced. Here, you …read all…
Posted on 28 June 2022 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos