Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : -board computer

Toyota Tacoma - -board computer

Toyota Tacoma (2016-2024 / N300)
How to reset the Toyota Tacoma TPMS light
You don't need any external tools to manually reset the tire pressure warning light on your new Toyota Tacoma. In fact, you just need to follow what is …read all…
Posted on 14 April 2023 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to manually set the time of Toyota Tacoma 2017
If you want to manually change the time shown on the display of your 2017 Toyota Tacoma, all you have to do is follow these simple steps. First, go inside the …read all…
Posted on 2 April 2023 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to reset the Toyota Tacoma maintenance light
Below we will find out how to properly reset the maintenance light of your Toyota Tacoma. This is an operation that can be perfectly performed independently …read all…
Posted on 17 April 2024 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to reset the Toyota Tacoma service
In this video tutorial you can see how you can reset the service on Toyota Tacoma, following a few simple steps, which will guide you towards the correct …read all…
Posted on 16 April 2024 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to reset the Toyota Tacoma service warning light
In the current video we see how to reset the Toyota Tacoma service warning light. We hold down the button on the on-board instrumentation, then turn the key to …read all…
Posted on 4 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos