Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Interior lights ceiling light bulb

Toyota Tacoma - Interior lights ceiling light bulb

Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
Where is the fuse for the interior lights in the Toyota Tacoma pickup?
In the event that the interior lights of our Toyota Tacoma pick-up suddenly stop working and the bulbs are in good condition, it is most likely that it is the …read all…
Posted on 27 December 2022 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos