Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Oil filter

Toyota Tacoma - Oil filter

Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the Toyota Tacoma oil filter
After a certain number of kilometers, it is advisable to replace the oil filter and also to change the oil itself. In this way it is possible to improve the …read all…
Posted on 20 July 2022 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos