Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Tail light

Toyota Tacoma - Tail light

Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the rear lights on the Toyota Tacoma?
In this tutorial, we can see how to replace the rear lights on the Toyota Tacoma, an extremely simple and quick operation. First of all, make sure that the key …read all…
Posted on 2 July 2023 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the rear lights in the Toyota Tacoma?
In this tutorial we can see how to replace the rear lights in the Toyota Tacoma, very simple and fast operation. Before proceeding, make sure that the key is …read all…
Posted on 4 September 2022 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to remove the rear lights in the Toyota Tacoma?
As we can see in this tutorial, removing the rear lights in the Toyota Tacoma is an extremely quick and easy operation. Before proceeding, in order to operate …read all…
Posted on 27 July 2022 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the rear light of the Toyota Tacoma?
In order to replace the rear light of the Toyota Tacoma, the tailgate of the rear compartment must be lowered, so that the screws located on the side of the …read all…
Posted on 12 June 2022 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to replace the rear lights of the Toyota Tacoma with led lamps [USA]
In order to install a new rear light unit with LED lights it is necessary to proceed as follows: open the rear panel, on the inside of the headlight there are …read all…
Posted on 25 April 2024 by ScegliAuto
Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
Toyota Tacoma taillight replacement
In this video tutorial we will see the step by step instructions that will allow us to disassemble and replace the taillight and its bulbs of the Toyota …read all…
Posted on 23 April 2024 by ScegliAuto
Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
How to replace the brake light bulbs on Toyota Tacoma Mk1
The guide shows how to perform the Toyota Tacoma Mk1 brake light replacement. Using a Phillips screwdriver, remove the four fixing screws of the rear light …read all…
Posted on 18 April 2024 by ScegliAuto
Toyota Tacoma (2016-2024 / N300)
How to replace the rear light in the Toyota Tacoma?
In this tutorial we can see how to replace the rear light in Toyota Tacoma, very simple and fast operation. To do this we will need a 10mm socket wrench, with …read all…
Posted on 16 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos