Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Tacoma
  6. : Cabin air filter

Toyota Tacoma - Cabin air filter

Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the cabin filter of the 2009 Toyota Tacoma.

Thanks to these simple steps, you will finally be able to replace the cabin air filter inside your 2009 Toyota Tacoma. First of all, you need to reach the …read all…
Posted on 8 May 2024 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the cabin air filter in the Toyota Tacoma?

In this tutorial, we can see how to replace the cabin filter in the Toyota Tacoma, a very simple and quick operation. First of all, let's go to the passenger …read all…
Posted on 13 April 2024 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the cabin air filter on Toyota Tacoma [USA]

Open the passenger side door, move the passenger seat all the way back. Open the glovebox located immediately under the dashboard and unhook, lifting the …read all…
Posted on 15 October 2022 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the pollen filter on Toyota Tacoma

In this video tutorial we can see how it is possible to replace the pollen filter on a Toyota Tacoma by following a few simple steps: the first thing to do is …read all…
Posted on 2 December 2022 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to replace the cabin air filter in Toyota Tacoma?

Replacing the cabin air filter in the Toyota Tacoma is a very simple and fast operation, let's see how to proceed in this tutorial. The filter is located …read all…
Posted on 22 July 2022 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How do you replace the cabin filter on the Toyota Tacoma?

To be able to replace the cabin filter on the Toyota Tacoma, you need to open the glove box located on the passenger side and remove the side retaining clips. …read all…
Posted on 24 November 2022 by ScegliAuto

Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos