Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Toyota Tacoma?

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin filter in a Toyota Tacoma, a very simple and quick operation. First, go to the passenger seat, then open the glove compartment and disconnect the stop shock on the right side.

Next, press both sides inward, separate the drawer from the dashboard, and open the long rectangular door. At this point, you can remove the old filter, clean the inside of the housing from any dirt residue, insert the replacement, and follow the reverse procedure.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Toyota Tacoma?
How to Replace the Cabin Air Filter in a Toyota Tacoma?
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) To replace the cabin air filter in a Toyota Tacoma, open the glove compartment on the passenger side and detach the side clips. This will allow you t…
How to Replace the Cabin Air Filter on a 2009 Toyota Tacoma
How to Replace the Cabin Air Filter on a 2009 Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) With these simple steps, you can finally replace the cabin air filter in your 2009 Toyota Tacoma. First, go to the passenger side and open the glove …
How to Replace the Cabin Air Filter in a Toyota Tacoma?
How to Replace the Cabin Air Filter in a Toyota Tacoma?
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) Replacing the cabin air filter in a Toyota Tacoma is a very simple and quick task. The filter is located behind the glove compartment on the passenge…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos