Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Toyota Tacoma?

Model: Toyota Tacoma MK 2, N220, N240, N250, N260, N270 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter in a Toyota Tacoma is a very simple and quick task. The filter is located behind the glove compartment on the passenger side.

Start by opening the compartment, disconnect the damper by disengaging its end as shown in the video, and detach the drawer. At this point, you will notice a rectangular cover.

Open it by pressing the upper clip and remove the old filter. Insert the replacement filter in the correct orientation and reassemble everything by following the reverse procedure.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on the Toyota Tacoma V6 MK2
How to Replace the Cabin Air Filter on the Toyota Tacoma V6 MK2
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) Let's see in this video how to remove and replace the cabin air filter on the second generation Toyota Tacoma V6, following the instructions below. F…
How to Replace the Cabin Air Filter in a Toyota Tacoma
How to Replace the Cabin Air Filter in a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) In this new mini guide dedicated to the Toyota Tacoma, discover how to replace the cabin air filter. This important component plays a central role in…
How to Replace the Cabin Air Filter on a 2009 Toyota Tacoma
How to Replace the Cabin Air Filter on a 2009 Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) With these simple steps, you can finally replace the cabin air filter in your 2009 Toyota Tacoma. First, go to the passenger side and open the glove …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos