Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Engine oil

Toyota Tacoma - Engine oil

Toyota Tacoma (2016-2024 / N300)
Engine oil replacement on Toyota Tacoma
Let's see in this video tutorial how to change the engine oil on a third generation Toyota Tacoma. We start by removing the metal protection positioned under …read all…
Posted on 18 April 2024 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to carry out the coupon (service) on the Toyota Tacoma V6
We see in this video the main steps that will allow us to carry out the routine maintenance service, replacing the engine oil and oil filter of the Toyota …read all…
Posted on 5 April 2024 by ScegliAuto
Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
How to replace engine oil and filter in Toyota Tacoma
To change the engine oil and filter in the Toyota Tacoma, open the engine hood and unscrew the oil filler cap. Then, with a container, place it under the oil …read all…
Posted on 25 March 2024 by ScegliAuto
Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
How to replace the oil and oil filter on a Toyota Tacoma
To change the oil and perform a filter change on a 1999 Toyota Tacoma you need to open the hood and locate the oil cap and unscrew it. Now prepare a pan to …read all…
Posted on 21 March 2024 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos