Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Tacoma
    4. : Car stereo

Toyota Tacoma - Car stereo

Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
Disassembly of the Toyota Tacoma's car radio.
In this short and simple guide, we will see the instructions that will allow us to disassemble the stock radio of the Toyota Tacoma. First, we get into the car …read all…
Posted on 14 April 2023 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to disassemble the car radio of the Toyota Tacoma
If you want to remove (and maybe even replace) the stock car radio of your Toyota Tacoma, all you have to do is follow the various steps that we will show you …read all…
Posted on 22 August 2022 by ScegliAuto
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2)
How to disassemble the car radio of Toyota Tacoma 2
Let's find out in this guide how to disassemble the original Toyota Tacoma second series car stereo, following the instructions below. First of all we get on …read all…
Posted on 12 July 2022 by ScegliAuto
Toyota Tacoma (1995-2004 / N170, N190, N140, N160, N150)
How to replace the car stereo of Toyota Tacoma Mk1
The guide shows how to replace the Toyota Tacoma Mk1 car stereo. The first operation to perform is to remove the lower part of the center console simply by …read all…
Posted on 8 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (3) Car stereo (4) Battery (7) Spark plugs (1) Bodywork (1) Key (11) -board computer (5) Checks and maintenance (15) Bearing (1) Brake discs (1) Headlight (4) Tail light (8) Air filter (5) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Accessory Kit (3) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (2) Engine oil (4) Door panel (3) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (2) Gear Shift Knob (1) Door (1) Instrument cluster (9) Wheel (2) Fuse box (7) Seat (2) Lock (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos