Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Radio from the Toyota Tacoma

Model: Toyota Tacoma N150, N190, N140, N160, N170 - Years 1995-2004
Part: Car stereo

In this brief and simple guide, find the instructions to remove the factory radio from the Toyota Tacoma. First, get inside the vehicle and start prying on the sides of the plastic cover for the climate control buttons to remove it; then unscrew the mounting screws located underneath, removing the center plastic along with the air vents, as shown in the video. At this point, unscrew the screws of the radio, disconnecting the electrical connectors located at the back to remove it and replace it with the new one; then reassemble everything!

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) Discover how to remove the original radio from the second generation Toyota Tacoma by following the instructions below. First, get inside the vehicle…
Toyota Tacoma (1995-2004 / N150, N190, N140, N160, N170) This guide shows how to replace the radio in the Toyota Tacoma Mk1. First, remove the lower part of the center console by simply releasing the securi…
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) To remove (and possibly replace) the stock radio in your Toyota Tacoma, follow the steps outlined in this guide. Before you begin, it is advisable to…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos