Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in the Toyota Tacoma Mk1

Model: Toyota Tacoma N170, N160, N150, N140, N190 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Car stereo

See other generations:
Video tutorial

This guide shows how to replace the radio in the Toyota Tacoma Mk1. First, remove the lower part of the center console by simply releasing the securing pins. Remove the ashtray and the two screws securing the plastic trim bezel.

Remove the air conditioning control knobs and detach the air conditioning bezel using a trim tool. Unscrew the two exposed screws and begin removing the plastic trim bezel.

Remove any CDs from the radio and unscrew the four 8 mm bolts to extract the radio. Disconnect the electrical connectors before fully removing it.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Toyota Tacoma 2
How to Remove the Radio from a Toyota Tacoma 2
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) Discover how to remove the original radio from the second generation Toyota Tacoma by following the instructions below. First, get inside the vehicle…
Removing the Radio from the Toyota Tacoma
Removing the Radio from the Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) In this brief and simple guide, find the instructions to remove the factory radio from the Toyota Tacoma. First, get inside the vehicle and start pry…
How to Remove the Stock Radio from Your Toyota Tacoma
How to Remove the Stock Radio from Your Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) To remove (and possibly replace) the stock radio in your Toyota Tacoma, follow the steps outlined in this guide. Before you begin, it is advisable to…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos